Floor heating without milling is possible because floor plates are prefabricated in the R Floorzz factory with all the slots already milled in. This allows you to install floor heating easily and quickly.
Table of contents
- Floor heating without milling: enjoying warm feet
- What are the benefits of underfloor heating without milling?
- When is heating without milling an interesting option?
- What opportunities does R Floorzz offer?
- Is this underfloor heating suitable for a renovation without breaking?
- Is this a good option when you want to replace underfloor heating without breaking?
- Is underfloor heating without milling the same as dry floor heating?
- What does underfloor heating without milling cost per m²?
- Are R Floorzz's pre-milled floor heating plates suitable for a wooden subfloor?
- 7 essential tips when considering having underfloor heating installed
Floor heating without milling: enjoying warm feet
What are the benefits of underfloor heating without milling?
The advantages of underfloor heating without milling are:
- Installation of underfloor heating on almost any subfloor, such as wood subfloor, concrete subfloor and tile subfloor.
- Possibility of laying it with underfloor heating pipe 16 mm.
- Different systems possible, floating and nail-fixed to the wood subfloor.
- Ready for the future.
- Low mounting height.
- Cost-saving.
- Less dust and clutter
When is heating without milling an interesting option?
This can be an interesting option in the following situations:
- Existing floors: If you have an existing floor that you don't want to damage or remove, then underfloor heating without milling is a good choice. The system is installed on top of the existing floor, so you don't have any demolition or breaking work.
- Quick installation: Floor heating without milling can often be installed faster than traditional systems that require milling into the floor.
- Limited surface height: There are systems for floor heating without milling that have a very limited surface height. This can be useful if you don't have much space between the floor and the bottom of the door, for example.
- Rental properties: If you live in a rental property and may not make permanent modifications, underfloor heating without milling may be a solution.
It is important to realize, however, that underfloor heating without milling can cause your floor to rise a bit higher. Check what the possible costs are for underfloor heating.
Calculate your costsWhat opportunities does R Floorzz offer?
R Floorzz supplies a mono and estrich duo system. These systems are both robust, fire safe and are supplied with 16 mm tube diamater, which are suitable for the heat pump.
The R Floorzz Mono floor heating system consists of a 21 mm floor element that is laid on the wooden subfloor. This can easily be finished with the R Floorzz Pouring compound.
Wanneer je op een verdiepingsvloer vloerverwarming wil leggen, kun je ook gebruik maken van R Floorzz estrich Duo systeem. Deze vloerelementen leg je zwevend en hebben een 9 mm. houtvezelplaat onder de vloerelementen die zorgen voor een contactgeluidreducatie van < 9 Db.
Need advice for your specific situation?
Make an appointmentIs this underfloor heating suitable for a renovation without breaking?
Yes, if the subfloor is rigid and constructive it can be done. You should always work on a constructively strong and level subfloor.
Is this a good option when you want to replace underfloor heating without breaking?
If you want to replace underfloor heating, you can install R Floorzz systems on the structural subfloor.
You could also choose to take out the floor including underfloor heating, which would lower the new system (surface height).
This can give more options for choosing decorative flooring.
Want to know the cost of underfloor heating without milling for your floor?
Calculate your costsIs underfloor heating without milling the same as dry floor heating?
Dry floor heating / Dry construction underfloor heating is not always the same as dry construction. There are different systems with bubble plates or other systems that can also be installed without milling.
What does underfloor heating without milling cost per m²?
The cost of underfloor heating without milling is from €62.50 per m2. at R Floorzz.
Want to know the cost for your specific floor?
Calculate your costsAre R Floorzz's pre-milled floor heating plates suitable for a wooden subfloor?
Yes, R Floorzz floor elements are ideally suited for a wood subfloor. Besides being suitable, it is also a durable floor heating system due to its excellent properties.
Request a quote